Post Reply to Vibrato with wheel

Thread Review (Newest First)

Posted by hansehv - 07-09-22, 20:36

Hi Conrad,
It's indeed related to the CC-message.
In the distribution, the label=name "modwheel" is related to CC-message=1 in the Controllers.CSV - as this is the midi standard. Perhaps your device is setup differently ?
The distribution has the "midimon" command to trace the midi messages you device sends.
And the wahsound is available, no matter you control depth with the wheel.
But as any effect, it needs to be turned on via a control, button or gui before you can hear any of the changes of its nature.
Neither Wah or Vibrato are turned on or off when the depth setting is changed.
Hans

Posted by Conrad - 06-09-22, 22:40

(05-09-22, 22:26)Conrad Wrote:
(05-09-22, 19:48)hansehv Wrote: Hi Conrad,
I you want this as a system default, change the CCmap.csv in the config directory (or samplerbox directory if insert the SD in a PC) and change

Code:
ModWheel Fixed WahPedal Continuous
to

Code:
ModWheel Fixed VibrDepth Continuous
Have a look in the rest of the file+Controllers.csv and Topology: integrate your midi device in all these mappings on the "more info" page for more ways of adapting samplerbox to your midi device.
Regards, Hans
Thanks so much Hans - I read the article, but it would have taken me a while to work that one out.

Kind regards,
Conrad

Hi Hans, I set that, but it didn't work. I'll have to try with my M-Audio keyboard to see if it makes a difference. I have a Launchkey Mk3 - 49. It didn't have the WahWah sound either before so something is up with the CC message.

Posted by Conrad - 05-09-22, 22:26

(05-09-22, 19:48)hansehv Wrote:
(05-09-22, 05:05)Conrad Wrote: Hi - is it possible to setup vibrato hooked up to the mod wheel?
I want to adjust the amount of vibrato depending on how far I push it up - like on the Microkorg.
Hi Conrad,
I you want this as a system default, change the CCmap.csv in the config directory (or samplerbox directory if insert the SD in a PC) and change

Code:
ModWheel Fixed WahPedal Continuous
to

Code:
ModWheel Fixed VibrDepth Continuous
Have a look in the rest of the file+Controllers.csv and Topology: integrate your midi device in all these mappings on the "more info" page for more ways of adapting samplerbox to your midi device.
Regards, Hans

Thanks so much Hans - I read the article, but it would have taken me a while to work that one out.

Kind regards,
Conrad

Posted by hansehv - 05-09-22, 19:48

(05-09-22, 05:05)Conrad Wrote: Hi - is it possible to setup vibrato hooked up to the mod wheel?
I want to adjust the amount of vibrato depending on how far I push it up - like on the Microkorg.

Hi Conrad,
I you want this as a system default, change the CCmap.csv in the config directory (or samplerbox directory if insert the SD in a PC) and change

Code:
ModWheel    Fixed    WahPedal    Continuous

Code:
ModWheel    Fixed    VibrDepth    Continuous

Have a look in the rest of the file+Controllers.csv and Topology: integrate your midi device in all these mappings on the "more info" page for more ways of adapting samplerbox to your midi device.
Regards, Hans

Posted by Conrad - 05-09-22, 05:05

Hi - is it possible to setup vibrato hooked up to the mod wheel?
I want to adjust the amount of vibrato depending on how far I push it up - like on the Microkorg.

Kind regards,

Conrad