26-02-21, 01:05 -
When plugging the SD in a PC: /boot is the root of the first (or only) partition of the inserted/mounted SD, so then read "/boot/samplerbox" as "drive: /samplerbox"
The /boot/samplerbox/wifistatips.txt is actually the /etc/dhcpd.conf.
Standard linux, so: in there you need an entry for interface eth0 like the wlan0, but without the "ssid" line. Adapt addresses to your situation.
This instructs dhcpd to use the info in there instead of trying to obtain the address from the network.
For volume issues Hans supplied a useful explanation on the more info page.
In my experience, missing note-offs quite aften arise from midi routing or cheap midi interfaces. So in general inspect your setup.
...but...
As you're using PI-zero with an image obtained here, it may even be a performance issue. All the nice extra's require resources.
The /boot/samplerbox/wifistatips.txt is actually the /etc/dhcpd.conf.
Standard linux, so: in there you need an entry for interface eth0 like the wlan0, but without the "ssid" line. Adapt addresses to your situation.
This instructs dhcpd to use the info in there instead of trying to obtain the address from the network.
For volume issues Hans supplied a useful explanation on the more info page.
In my experience, missing note-offs quite aften arise from midi routing or cheap midi interfaces. So in general inspect your setup.
...but...
As you're using PI-zero with an image obtained here, it may even be a performance issue. All the nice extra's require resources.