05-05-22, 06:21 -
I have a RaspberryPi Zero W and the HifiBerry DAC.
![[Image: dacplus-zero.jpg]](https://www.hifiberry.com/wp-content/uploads/2016/09/dacplus-zero.jpg)
I have used it before without problems and now I have an image with [samplerbox](https://homspace.nl/samplerbox) and I added the line to `/boot/config.txt`:
I now get the error when running `speaker-test`:
I did also run the script for the adafruit i2s DAC:
Some debugging:
config.txt
dmesg
Please note that I did cross-post my question to https://raspberrypi.stackexchange.com/q/137342
I have used it before without problems and now I have an image with [samplerbox](https://homspace.nl/samplerbox) and I added the line to `/boot/config.txt`:
Code:
dtoverlay=hifiberry-dacI now get the error when running `speaker-test`:
Code:
ALSA lib pcm_dmix.c:1108:(snd_pcm_dmix_open) unable to open slave
Playback open error: -16,Device or resource busyI did also run the script for the adafruit i2s DAC:
Code:
curl -sS https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/i2samp.sh | bashSome debugging:
Code:
cat /proc/asound/cards
0 [sndrpihifiberry]: RPi-simple - snd_rpi_hifiberry_dac
snd_rpi_hifiberry_dac
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_dac], device 0: HifiBerry DAC HiFi pcm5102a-hifi-0 [HifiBerry DAC HiFi pcm5102a-hifi-0]
Subdevices: 0/1
Subdevice #0: subdevice #0
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
speakerbonnet
dmixer
softvol
default
sysdefault:CARD=sndrpihifiberry
snd_rpi_hifiberry_dac, HifiBerry DAC HiFi pcm5102a-hifi-0
Default Audio Device
dmix:CARD=sndrpihifiberry,DEV=0
snd_rpi_hifiberry_dac, HifiBerry DAC HiFi pcm5102a-hifi-0
Direct sample mixing device
dsnoop:CARD=sndrpihifiberry,DEV=0
snd_rpi_hifiberry_dac, HifiBerry DAC HiFi pcm5102a-hifi-0
Direct sample snooping device
hw:CARD=sndrpihifiberry,DEV=0
snd_rpi_hifiberry_dac, HifiBerry DAC HiFi pcm5102a-hifi-0
Direct hardware device without any conversions
plughw:CARD=sndrpihifiberry,DEV=0
snd_rpi_hifiberry_dac, HifiBerry DAC HiFi pcm5102a-hifi-0
Hardware device with all software conversions
sudo vcdbg log msg
001358.826: brfs: File read: /mfs/sd/config.txt
001359.779: brfs: File read: 1955 bytes
001448.714: brfs: File read: /mfs/sd/config.txt
001449.597: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
001469.225: brfs: File read: 1955 bytes
001646.660: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
001646.714: *** Restart logging
001685.082: HDMI0: hdmi_pixel_encoding: 162000000
001686.834: dtb_file 'bcm2708-rpi-zero-w.dtb'
001694.353: brfs: File read: /mfs/sd/bcm2708-rpi-zero-w.dtb
001694.378: Loading 'bcm2708-rpi-zero-w.dtb' to 0x100 size 0x67b1
001707.167: brfs: File read: 26545 bytes
001720.812: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
001787.035: brfs: File read: 1523 bytes
001791.609: brfs: File read: /mfs/sd/config.txt
001791.768: dtparam: i2c_arm=on
001799.957: dtparam: i2s=on
001806.934: dtparam: spi=on
001814.329: dtwarn: overlay 'pi3-miniuart-bt' has been renamed 'miniuart-bt'
001814.967: brfs: File read: 1955 bytes
001825.018: brfs: File read: /mfs/sd/overlays/miniuart-bt.dtbo
001847.704: Loaded overlay 'pi3-miniuart-bt'
001897.525: brfs: File read: 1819 bytes
001906.627: brfs: File read: /mfs/sd/overlays/midi-uart0.dtbo
001913.351: Loaded overlay 'midi-uart0'
001930.586: brfs: File read: 716 bytes
001948.697: brfs: File read: /mfs/sd/overlays/hifiberry-dac.dtbo
001958.428: Loaded overlay 'hifiberry-dac'
001988.412: brfs: File read: 655 bytes
001992.686: brfs: File read: /mfs/sd/cmdline.txt
001992.730: Read command line from file 'cmdline.txt':
001992.754: 'console=tty1 root=PARTUUID=3146c77c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait fastboot noswap ro rfkill.default_state=1 systemd.restore_state=0 ipv6.disable=1'
002007.360: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined
003704.380: brfs: File read: 179 bytes
004109.597: brfs: File read: /mfs/sd/kernel.img
004109.614: Loading 'kernel.img' to 0x8000 size 0x5b46f8
004109.636: Device tree loaded to 0x1bfe9200 (size 0x6d22)
004112.399: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
008697.270: vchiq_core: vchiq_init_state: slot_zero = 0x97d80000, is_master = 1
008701.545: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
008707.992: TV service:host side not connected, dropping notification 0x00000002, 0x00000001, 0x00000010config.txt
Code:
# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details
# File is manually customized for samplerbox, see
# config.txt.org for the one initially adapted via raspi-config
gpu_mem=64
boot_delay=0
boot_delay_ms=0
disable_splash=1
disable_audio_dither=1
# Distribution enables I2C and SPI by default to ease customization
# If you need affected pins for other purpose, comment applicable peripheral
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=spi=on
# Distribution enables the serial midi port (DIY 5-pole DIN) to ease customization
# If you need affected pins for other purpose, comment lines below
enable_uart=1
dtoverlay=pi3-miniuart-bt
dtoverlay=midi-uart0
# Enable onboard, hdmi or usb-dac audio (loads snd_bcm2835)
# Set this to off to use a dac requiring an overlay statement below
#dtparam=audio=on
# For a complete list of all available overlays, see overlays/README
# For hifiberry (or compatible like PiFi) dacs uncomment appropriate parm:
#dtoverlay=hifiberry-dacplus
#dtoverlay=hifiberry-digi
#dtoverlay=hifiberry-amp
# For some hifiberries (see https://www.hifiberry.com/docs/software -> Linux) uncomment:
#force_eeprom_read=0
# For Pimoroni PirateAudio uncomment the following (and dtoverlay=hifiberry-dac above)
#gpio=25=op,dh
[pi4]
# Enable DRM VC4 V3D driver on top of the dispmanx display stack
#dtoverlay=vc4-fkms-v3d,audio=off
#max_framebuffers=2
#hdmi_ignore_edid_audio
# Setting hdmi_ignore_edid_audio to 1 pretends that all audio formats are unsupported by the display.
# This means ALSA will default to the analogue audio (headphone) jack.
#hdmi_force_edid_audio
# Setting hdmi_force_edid_audio to 1 pretends that all audio formats are supported by the display,
# allowing passthrough of DTS/AC3 even when this is not reported as supported.
[all]
#dtoverlay=vc4-fkms-v3d
#dtoverlay=i2s-mmap
force_eeprom_read=0
dtoverlay=hifiberry-dacdmesg
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.10.17+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1421 Thu May 27 13:58:02 BST 2021
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Reserved memory: created CMA memory pool at 0x17c00000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] Normal zone: 1008 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113680
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:D4:A5:66 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=tty1 root=PARTUUID=3146c77c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait fastboot noswap ro rfkill.default_state=1 systemd.restore_state=0 ipv6.disable=1
[ 0.000000] Kernel parameter elevator= does not have any effect anymore.
Please use sysfs to set IO scheduler for individual devices.
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 374452K/458752K available (8638K kernel code, 1324K rwdata, 2816K rodata, 420K init, 837K bss, 18764K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 30576 entries in 60 pages
[ 0.000000] ftrace: allocated 60 pages with 4 groups
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x324/0x564 with crng_init=0
[ 0.000024] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000094] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000180] bcm2835: system timer (irq = 27)
[ 0.000837] Console: colour dummy device 80x30
[ 0.001508] printk: console [tty1] enabled
[ 0.001604] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060338] pid_max: default: 32768 minimum: 301
[ 0.060631] LSM: Security Framework initializing
[ 0.060953] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.061021] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.063169] Disabling memory control group subsystem
[ 0.063466] CPU: Testing write buffer coherency: ok
[ 0.065269] Setting up static identity map for 0x8200 - 0x8238
[ 0.066531] devtmpfs: initialized
[ 0.079605] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.079991] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.080074] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.087942] pinctrl core: initialized pinctrl subsystem
[ 0.089814] NET: Registered protocol family 16
[ 0.094742] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.101160] audit: initializing netlink subsys (disabled)
[ 0.102649] thermal_sys: Registered thermal governor 'step_wise'
[ 0.103837] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.103926] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.104187] Serial: AMBA PL011 UART driver
[ 0.110687] audit: type=2000 audit(0.100:1): state=initialized audit_enabled=0 res=1
[ 0.131280] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.150819] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-05-27T14:04:13, variant start
[ 0.160837] raspberrypi-firmware soc:firmware: Firmware hash is 7d9a298cda813f747b51fe17e1e417e7bf5ca94d
[ 0.219148] bcm2835-dma 20007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.222337] SCSI subsystem initialized
[ 0.222812] usbcore: registered new interface driver usbfs
[ 0.222958] usbcore: registered new interface driver hub
[ 0.223091] usbcore: registered new device driver usb
[ 0.225981] clocksource: Switched to clocksource timer
[ 2.224305] VFS: Disk quotas dquot_6.6.0
[ 2.224485] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.224769] FS-Cache: Loaded
[ 2.225156] CacheFiles: Loaded
[ 2.243293] NET: Registered protocol family 2
[ 2.244607] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 2.244757] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 2.244875] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 2.244978] TCP: Hash tables configured (established 4096 bind 4096)
[ 2.245182] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 2.245257] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 2.245748] NET: Registered protocol family 1
[ 2.247086] RPC: Registered named UNIX socket transport module.
[ 2.247158] RPC: Registered udp transport module.
[ 2.247194] RPC: Registered tcp transport module.
[ 2.247227] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.248965] hw perfevents: no irqs for PMU, sampling events not supported
[ 2.249086] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
[ 2.253610] Initialise system trusted keyrings
[ 2.254307] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 2.266428] zbud: loaded
[ 2.269457] FS-Cache: Netfs 'nfs' registered for caching
[ 2.270906] NFS: Registering the id_resolver key type
[ 2.271017] Key type id_resolver registered
[ 2.271057] Key type id_legacy registered
[ 2.271340] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.273268] Key type asymmetric registered
[ 2.273343] Asymmetric key parser 'x509' registered
[ 2.273462] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.273514] io scheduler mq-deadline registered
[ 2.273551] io scheduler kyber registered
[ 2.276836] bcm2708_fb soc:fb: FB found 1 display(s)
[ 2.336006] random: fast init done
[ 2.337596] Console: switching to colour frame buffer device 228x61
[ 2.371478] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1824x984
[ 2.378061] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 2.382738] bcm2835-rng 20104000.rng: hwrng registered
[ 2.383680] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 2.385756] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
[ 2.410558] brd: module loaded
[ 2.427652] loop: module loaded
[ 2.430117] Loading iSCSI transport class v2.0-870.
[ 2.433093] libphy: Fixed MDIO Bus: probed
[ 2.433764] usbcore: registered new interface driver smsc95xx
[ 2.434037] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 3.162621] Core Release: 2.80a
[ 3.162787] Setting default values for core params
[ 3.162980] Finished setting default values for core params
[ 3.363527] Using Buffer DMA mode
[ 3.363715] Periodic Transfer Interrupt Enhancement - disabled
[ 3.363949] Multiprocessor Interrupt Enhancement - disabled
[ 3.364171] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 3.364514] Dedicated Tx FIFOs mode
[ 3.365731] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = d7d14000 dma = 0x97d14000 len=9024
[ 3.366291] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 3.384785] dwc_otg: Microframe scheduler enabled
[ 3.385078] WARN::hcd_init_fiq:457: FIQ on core 0
[ 3.402779] WARN::hcd_init_fiq:458: FIQ ASM at c0652330 length 36
[ 3.420225] WARN::hcd_init_fiq:497: MPHI regs_base at dc810000
[ 3.437734] dwc_otg 20980000.usb: DWC OTG Controller
[ 3.446566] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 3.455853] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 3.464828] Init: Port Power? op_state=1
[ 3.473964] Init: Power Port (0)
[ 3.483320] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 3.492609] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.501493] usb usb1: Product: DWC OTG Controller
[ 3.510617] usb usb1: Manufacturer: Linux 5.10.17+ dwc_otg_hcd
[ 3.519416] usb usb1: SerialNumber: 20980000.usb
[ 3.529629] hub 1-0:1.0: USB hub found
[ 3.538898] hub 1-0:1.0: 1 port detected
[ 3.549568] dwc_otg: FIQ enabled
[ 3.549596] dwc_otg: NAK holdoff enabled
[ 3.549612] dwc_otg: FIQ split-transaction FSM enabled
[ 3.549641] Module dwc_common_port init
[ 3.550285] usbcore: registered new interface driver usb-storage
[ 3.560327] mousedev: PS/2 mouse device common for all mice
[ 3.571227] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 3.584041] sdhci: Secure Digital Host Controller Interface driver
[ 3.593410] sdhci: Copyright(c) Pierre Ossman
[ 3.603346] mmc-bcm2835 20300000.mmcnr: could not get clk, deferring probe
[ 3.613484] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 3.623359] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.633329] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.643352] hid: raw HID events driver (C) Jiri Kosina
[ 3.652701] usbcore: registered new interface driver usbhid
[ 3.661966] usbhid: USB HID core driver
[ 3.678494] Initializing XFRM netlink socket
[ 3.688402] NET: Registered protocol family 17
[ 3.697448] Key type dns_resolver registered
[ 3.707688] registered taskstats version 1
[ 3.716325] Loading compiled-in X.509 certificates
[ 3.742627] uart-pl011 20201000.serial: there is not valid maps for state default
[ 3.751834] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 3.761071] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 3.775038] 20215040.serial: ttyS0 at MMIO 0x20215040 (irq = 53, base_baud = 50000000) is a 16550
[ 3.785955] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 3.797867] mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 3.807293] mmc-bcm2835 20300000.mmcnr: DMA channel allocated
[ 3.817112] Indeed it is in host mode hprt0 = 00021501
[ 3.902442] sdhost: log_buf @ (ptrval) (97d13000)
[ 3.948707] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.959950] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.968964] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 3.982942] of_cfs_init
[ 4.012592] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 4.022145] of_cfs_init: OK
[ 4.034383] Waiting for root device PARTUUID=3146c77c-02...
[ 4.043745] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 4.052693] usb 1-1: new full-speed USB device number 2 using dwc_otg
[ 4.062733] Indeed it is in host mode hprt0 = 00021501
[ 4.195171] mmc0: host does not support reading read-only switch, assuming write-enable
[ 4.211216] mmc0: new high speed SDHC card at address aaaa
[ 4.222662] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[ 4.240270] mmcblk0: p1 p2 p3
[ 4.280667] mmc1: new high speed SDIO card at address 0001
[ 4.304744] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.315938] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 4.326869] usb 1-1: New USB device found, idVendor=05ac, idProduct=026c, bcdDevice= 8.52
[ 4.336410] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.345786] usb 1-1: Product: Magic Keyboard with Numeric Keypad
[ 4.355218] usb 1-1: Manufacturer: Apple Inc.
[ 4.364461] usb 1-1: SerialNumber: F0T92730023HTH7A2
[ 4.385403] devtmpfs: mounted
[ 4.396270] hid-generic 0003:05AC:026C.0001: hiddev96,hidraw0: USB HID v1.10 Device [Apple Inc. Magic Keyboard with Numeric Keypad] on usb-20980000.usb-1/input0
[ 4.413658] Freeing unused kernel memory: 420K
[ 4.423704] Kernel memory protection not selected by kernel config.
[ 4.434842] Run /sbin/init as init process
[ 4.444952] with arguments:
[ 4.444970] /sbin/init
[ 4.444983] fastboot
[ 4.444994] noswap
[ 4.445005] with environment:
[ 4.445035] HOME=/
[ 4.445048] TERM=linux
[ 4.452313] input: Apple Inc. Magic Keyboard with Numeric Keypad Keyboard as /devices/platform/soc/20980000.usb/usb1/1-1/1-1:1.1/0003:05AC:026C.0002/input/input0
[ 4.527922] input: Apple Inc. Magic Keyboard with Numeric Keypad Consumer Control as /devices/platform/soc/20980000.usb/usb1/1-1/1-1:1.1/0003:05AC:026C.0002/input/input1
[ 4.541240] hid-generic 0003:05AC:026C.0002: input,hiddev97,hidraw1: USB HID v1.10 Keyboard [Apple Inc. Magic Keyboard with Numeric Keypad] on usb-20980000.usb-1/input1
[ 5.238181] systemd[1]: System time before build time, advancing clock.
[ 5.439140] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 5.563080] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 5.589103] systemd[1]: Detected architecture arm.
[ 5.659426] systemd[1]: Set hostname to <samplerbox>.
[ 8.136422] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.454686] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.467467] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 8.494437] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.507256] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 8.535132] systemd[1]: Listening on udev Control Socket.
[ 8.563405] systemd[1]: Listening on Journal Socket.
[ 8.611751] systemd[1]: Starting Load Kernel Modules...
[ 8.661744] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 8.718250] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 8.939906] i2c /dev entries driver
[ 10.690822] systemd[1]: Starting File System Check on Root Device...
[ 10.898150] systemd[1]: Starting Apply Kernel Variables...
[ 11.030153] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 11.217841] systemd[1]: Mounting Kernel Configuration File System...
[ 11.506741] systemd[1]: Started File System Check on Root Device.
[ 11.706469] systemd[1]: Started Apply Kernel Variables.
[ 11.749962] systemd[1]: Mounted Kernel Configuration File System.
[ 11.891236] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 11.947422] systemd[1]: Started Journal Service.
[ 12.980713] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 14.389957] systemd-journald[93]: Received request to flush runtime journal from PID 1
[ 16.312245] mc: Linux media interface: v0.10
[ 16.556352] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 16.559460] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 16.559502] [vc_sm_connected_init]: start
[ 16.648788] [vc_sm_connected_init]: installed successfully
[ 16.723125] videodev: Linux video capture interface: v2.00
[ 16.936569] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 16.941069] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 16.988566] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.022186] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.071235] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.175308] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 17.182074] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 17.206769] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 17.212548] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 17.212605] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 17.212642] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 17.212672] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 17.212701] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 17.226221] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 17.226315] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 17.227381] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 17.298697] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 17.298802] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 17.372001] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 17.372109] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 20.598371] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 21.218907] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 22.097172] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[ 22.107958] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 22.108481] usbcore: registered new interface driver brcmfmac
[ 22.143502] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 22.442506] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 22.442778] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 22.444096] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd
[ 22.458127] apple 0003:05AC:026C.0001: hiddev96,hidraw0: USB HID v1.10 Device [Apple Inc. Magic Keyboard with Numeric Keypad] on usb-20980000.usb-1/input0
[ 22.649823] input: Apple Inc. Magic Keyboard with Numeric Keypad as /devices/platform/soc/20980000.usb/usb1/1-1/1-1:1.1/0003:05AC:026C.0002/input/input3
[ 22.767935] apple 0003:05AC:026C.0002: input,hiddev97,hidraw1: USB HID v1.10 Keyboard [Apple Inc. Magic Keyboard with Numeric Keypad] on usb-20980000.usb-1/input1
[ 25.205255] random: crng init done
[ 25.205289] random: 7 urandom warning(s) missed due to ratelimiting
[ 26.324655] fuse: init (API version 7.32)
[ 31.331165] 8021q: 802.1Q VLAN Support v1.8
[ 39.661065] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 451.617136] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)Please note that I did cross-post my question to https://raspberrypi.stackexchange.com/q/137342
This post was last modified: 05-05-22, 06:24 by besibesi.