Hello to Hans and to the entire samplerbox-community
I just want to share on how I was able to getting the "Hifiberry DAC2 PRO XLR" to work with the latest samplerbox-image (Sbox20210521.img):
Modify the file "config.txt" in the BOOT-partition in the following way
1)
- comment out the line "dtparam=audio=on" (add # in front of the line)
2)
- remove the # at the start of the line "dtoverlay=hifiberry-dacplus" (so it is an active-entry)
3)
- insert after the modified line (point 2) a new line with the following text: force_eeprom_read=0
Without this additional configuration-instruction the DAC2 was not recognized and the hole samplerbox-daemon wasn't starting.
Hope this information will help other users who want to use the same DAC as I have in my setup.
Cheerio
Aendu
I just want to share on how I was able to getting the "Hifiberry DAC2 PRO XLR" to work with the latest samplerbox-image (Sbox20210521.img):
Modify the file "config.txt" in the BOOT-partition in the following way
1)
- comment out the line "dtparam=audio=on" (add # in front of the line)
2)
- remove the # at the start of the line "dtoverlay=hifiberry-dacplus" (so it is an active-entry)
3)
- insert after the modified line (point 2) a new line with the following text: force_eeprom_read=0
Without this additional configuration-instruction the DAC2 was not recognized and the hole samplerbox-daemon wasn't starting.
Hope this information will help other users who want to use the same DAC as I have in my setup.
Cheerio
Aendu
This post was last modified: 03-09-21, 13:23 by Aendu.
Edit Reason: Typo...root instead of boot